New Brass Chrome Kitchen Tap With Swivel Spout
Brass Chrome Concealed Shower Mixer
Exposed Installation Brass Chrome Shower Head Set
New Look Brass Chrome Shower Mixer Diverter
Brass Chrome Wall Mounted Bath Shower Mixer
Brass Chrome Shower Mixer Diverter Faucet Set
Square Brass Chrome Bath Shower Mixer And Diverter
Is This The Gunmetal Brushed Bathroom Products You Prefer?MAR.25,2021
New Faucet With Marble HandleMAR.23,2021
FSA l Spanish minimalist Penthouse residenceMAR.18,2021
Watermark Marble Double Handle Hot Cold Basin TapMAR.12,2021
The prince of galle, Sri LankaFEB.27,2021
Vintage Luxury yacht Hotel – YangonFEB.27,2021
Mission Hills Resort HaikouFEB.27,2021
Hotel Marvel Manalay MyanmarFEB.27,2021
Dusit Grand ParkFEB.27,2021
Lots of peaple believe that the high end bathroom faucets, kitchen taps, and bath shower set will keep shining of the chrome plated surface after long term used. They think the furfaces are corrosion resistant and easy to clean. But after using, they found that water stains are easy to remain on the surface. After the water stains are dried, they will form very serious spots, and if the clogging is not clean, it will become eclipsed. Maintenance depends on the small details of our daily life, such as when you using or cleaning it, the small details will damage your faucet. So how should the faucet be cleaned and maintained properly?
The cleaning of the faucet is not complicated. Usually, after washing your face and brushing your teeth, you can wipe it with a rag to keep the faucet clean long as possible. The copper faucet can be scrubbed with boiling water and detergent, or it can be directly cleaned with some powerful detergents to remove oil and dirt. There is scale or rust on the faucet, wipe the surface with a damp cloth or sponge dipped in a special detergent in time, and then wipe it with a clean cloth or rinse with water. In addition, use a soft toothbrush dipped in toothpaste or wipe gently with a scouring pad dipped in toothpaste to remove scale and oil stains, and make the faucet surface clean and bright. If you find that the water output of the faucet is reduced or the water output fork is likely to be caused by the blocker of bubble, remove it,and soak it in vinegar, clean the debris with a small brush or other tools, and then install it .
Now most family choose the faucet that resists corrosion and not easy to rust, please pay attention to the method when cleaning, so we can lest cause faucet to appear artificial wear.Do not use steel wire ball and other hard things to wipe the surface of the faucet, because steel wire ball is very hard, it is easy to scratch the surface. It is better to use neutral cleaning agent for cleaning, acid and alkaline cleaning agents do not apply to clean the tap.After faucet is clean, the towel that should use dry does not drop wool will surface surplus moisture is wiped, lest remain water is soiled.
Don't use too much force to switch the faucet, just turn it gently when you are using it. Even a traditional faucet does not require much effort to screw it. In particular, do not use the handle as an armrest to support or use it. The metal hose of the shower head of the bathtub faucet should be kept naturally stretched, and do not coil it on the faucet when not in use. At the same time, when using or not using, pay attention not to form a dead angle at the joint of the hose and the valve body, so as not to break or damage the hose.
When the water pressure is not less than 0.02mpa (ie 0.2kgf / cm2), after using it for a period of time, if the water output is reduced, or even the water heater is turned off, you can gently twist the water outlet Under the screen cover, to remove impurities, generally can be restored as before. During construction and installation, please have experienced and qualified professionals. The faucet should try not to bump with hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the surface coating gloss. Pay attention to remove the sundries in the pipeline before installing the faucet